The BGNR-30 Powered Walkie Reach Stacker combines the tight maneuvering ability of a walkie straddle stacker with the operating flexibility of a counterbalanced truck. A pantograph extends the handled loads beyond the straddle legs and can be retracted for compact turns and tight manuevering. Power steering, side shift, proportional hydraulics, and tilt all result in intuitive control and exceptionally versatile performance. CAPACITY ✓ 3,000 lb (1,363 kg) at 24" (610mm) load center LIFT HEIGHTS ✓ 106" (2,292 mm) ✓ 126" (3,200 mm) ✓ 157" (3,988 mm) ✓ 189" (4,801 mm) PERFORMANCE ✓ Power steering for maximum control and efficiency ✓ 24V AC drive motor ✓ ZAPI programmable travel controller supports simple and precise truck positioning ✓ Creep speed control allows for easier maneuvering at low speeds in tight places ✓ Travel speed remains constant relative to throttle position regardless of the load ✓ Regenerative neutral braking ✓ Travel speed: 3.4mph (unloaded) and 3.1mph (under load) ERGONOMICS ✓ Travel, lift, lower, and tilt functions are located in the ergonomic operator handle, which can be operated with either hand ✓ Hand grips fit the operator's hand comfortably, reducing fatigue STRUCTURAL INTEGRITY ✓ High-visibility I-beam mast with dual lifting chains ✓Pantograph stroke extends the fork carriage beyond the straddle legs ✓ Integral tilt and sideshift ✓ Fork size: 42" (1,067 mm) standard ✓ 3" (76 mm) straddles are fixed at either 34" ID/42" OD or 42" ID/50" OD ✓ BGNR-30-189 features straddle leg ID of either 42" or 50" (1,067 mm or 1,270 mm) ✓ 224 AH battery package (4-6 volt, maintenance-free AGM batteries), complete with automatic 25AMP / 110VAC plug-in internal charger ✓ BGNR-30-189 requires an industrial battery (not included) ✓ Heavy-duty two-piece head cover protects major components from impact damage

The BGL-33 Walkie Counterbalanced Stacker stacks and transports palletized loads that straddle stackers or reach trucks cannot carry and position as efficiently. A power steering system results in easy and ergonomic vehicle control. CAPACITY ✓ 3,300 lb (1,497 kg) LIFT HEIGHTS ✓ 104" (2,642 mm) ✓ 128" (3,251 mm) ✓ 157" (3,988 mm) PERFORMANCE ✓ AC drive motor delivers steady acceleration and travel speeds ✓ 24V ZAPI travel controller supports simple and precise truck positioning ✓ Travel speed is reduced when forks are 12" (305 mm) above height ✓ Neutral braking resists rollback on ramps ✓ Creep speed control allows for easier maneuvering at low speeds in tight places ✓Travel speed: 3.41mph (unloaded) and 3.1mph (under load) ERGONOMICS ✓ Travel, lift, lower, and tilt functions are located in the ergonomic operator handle, which can be operated with either hand ✓ Hand grips fit the operator's hand comfortably, reducing fatigue STRUCTURAL INTEGRITY ✓ 24" (610 mm) load center ✓ Fork size: 42" (1,067 mm) standard ✓ 35" (889 mm) tall load backrest ✓ High visibility I-beam mast

The BGL-22 Walkie Counterbalanced Stacker is a cost-effective solution for the stacking and transportation of palletized loads that a straddle stacker or reach truck cannot handle as efficiently. CAPACITY ✓ 2,200 lb (1,000 kg) LIFT HEIGHTS ✓ 104" (2,642 mm) ✓ 128" (3,251 mm) ✓157" (3,988 mm) PERFORMANCE ✓ AC drive motor delivers steady acceleration and travel speeds ✓ 24V ZAPI travel controller supports simple and precise truck positioning ✓ Travel speed is reduced when forks are 12" (305 mm) above height ✓ Neutral braking resists rollback on ramps ✓ Creep speed control allows for easier maneuvering at low speeds in tight places ✓ Travel speed: 3.41mph (unloaded) and 3.1mph (under load) ERGONOMICS ✓ Travel, lift, lower, and tilt functions are located in the ergonomic operator handle, which can be operated with either hand ✓ Hand grips fit the operator's hand comfortably, reducing fatigue STRUCTURAL INTEGRITY ✓ 24" (610 mm) load center ✓ Fork size: 42" (1,067 mm) standard ✓ Premium AGM battery pack with integral 110V charger ✓35" (889 mm) tall load backrest ✓ High visibility I-beam mast APPLICATION VIDEO

The BGN-40 Powered Walkie Stacker builds upon proven performance standards by incorporating state-of-the art lift truck technology. Its designed and engineered to meet and even exceed the demanding requirements of busy warehouses. CAPACITY ✓ 4,000 lb (1,818 kg) LIFT HEIGHTS ✓ 104" (2,641 mm) ✓ 126" (3,200 mm) ✓ 142" (3,607 mm) ✓ 157" (3,988 mm) ✓ 177" (4,496 mm) PERFORMANCE ✓ 24V AC drive motor ✓ 24V ZAPI programmable travel controller supports simple and precise truck positioning ✓ Creep speed control allows for easier maneuvering at low speeds in tight places ✓ Travel speed remains constant relative to throttle position regardless of the load ✓ Regenerative braking kicks in when the forks are 12" (305 mm) above height ✓ Travel speed: 3.4mph (unloaded) and 3.1mph (under load) ERGONOMICS ✓ Travel, lift, and lower functions are located in the ergonomic operator handle, which can be operated with either hand ✓ Hand grips fit the operator's hand comfortably, reducing fatigue STRUCTURAL INTEGRITY ✓ Bolt-on high-visibility mast ✓Fork size: 42" (1,067 mm) standard ✓3" (76 mm) adjustable straddle legs support easy positioning in racked aisles ✓ 224 AH battery package (4-6 volt, maintenance-free AGM batteries), complete with automatic 25AMP / 110VAC plug-in internal charger ✓ I-beam construction ✓Heavy-duty two-piece head cover protects major components from impact damage

The BGS-30 Powered Walkie Stacker is technologically advanced but user-friendly. Built-in productivity enhancements, superior AC power, and a short turning radius for crowded facilities all ensure efficient performance during the most demanding warehouse applications. CAPACITY ✓ 3,000 lb (1,364 kg) LIFT HEIGHTS ✓ 104" (2,641 mm) ✓ 126" (3,200 mm) ✓ 157" (3,988 mm) ✓ 177" (4,496 mm) PERFORMANCE ✓ 24V AC drive motor ✓ 24V ZAPI programmable travel controller supports simple and precise truck positioning ✓ Creep speed control allows for easier maneuvering at low speeds in tight places ✓ Travel speed remains constant relative to throttle position regardless of the load ✓ Regenerative braking kicks in when the forks are 12" (305 mm) above height ✓ Travel speed: 3.4mph (unloaded) and 3.1mph (under load) ERGONOMICS ✓ Travel, lift, lower, and tilt functions are located in the ergonomic operator handle, which can be operated with either hand ✓ Hand grips fit the operator's hand comfortably, reducing fatigue STRUCTURAL INTEGRITY ✓ Bolt-on high-visibility mast ✓ Fork size: 42" (1,067 mm) standard ✓ 3" (76 mm) adjustable straddle legs support easy positioning in racked aisles ✓ 224 AH battery package (4-6 volt, maintenance-free AGM batteries), complete with automatic 25AMP / 110VAC plug-in internal charger ✓ I-beam construction ✓ Heavy-duty two-piece head cover protects major components from impact damage APPLICATION VIDEO

The BGS-25 Powered Walkie Stacker can transport, stack, and position 2,000 and 2,500 lb (909 and 1,136 kg) loads up to 157" (3,988 mm). This intermediate-duty stacker has a short turning radius, supporting full functionality even in narrow aisles and tool rooms. CAPACITIES ✓2,000 and 2,500 lb (909 and 1,136 kg) LIFT HEIGHTS ✓ 106" (2,692 mm) ✓ 130" (3,302 mm) ✓ 157" (3,988 mm) PERFORMANCE ✓ 24V AC drive motor ✓ 24V ZAPI programmable travel controller supports simple and precise truck positioning ✓ Creep speed control allows for easier maneuvering at low speeds in tight places ✓ Travel speed remains constant relative to throttle position regardless of the load ✓ Regenerative braking kicks in when the forks are 12" (305 mm) above height ✓ Travel speed: 3.4mph (unloaded) and 3.1mph (under load) ERGONOMICS ✓ Travel, lift, lower, and tilt functions are located in the ergonomic operator handle, which can be operated with either hand ✓ Hand grips fit the operator's hand comfortably, reducing fatigue STRUCTURAL INTEGRITY ✓ Bolt-on high-visibility mast ✓ Fork size: 42" (1,067 mm) standard ✓3" (76 mm) adjustable straddle legs support easy positioning in racked aisles ✓224 AH battery package (4-6 volt, maintenance-free AGM batteries), complete with automatic 25AMP / 110VAC plug-in internal charger ✓ I-beam construction ✓ Heavy-duty two-piece head cover protects major components from impact damage

The EPS-30 Powered Drive Straddle Truck has a compact design to support general material handling, stacking, and work positioning in tight areas. CAPACITY ✓ 3,000 lb (1,361 kg) LIFT HEIGHT ✓ 128" (3,251 mm) PERFORMANCE ✓ 24-volt maintenance-free batteries with direct connect 110A 110VAC plug-in automatic charger ✓ S22-128 (2)12V 100AH ✓ Travel speed: 3.2mph (unloaded) and 3.0mph (under load) ERGONOMICS ✓ Travel, lift, and lower functions are located in the ergonomic operator handle ✓ All operator controls are accessible without having to lift the hand from the handle ✓Angle grips allow easy operation with either hand ✓Standard wrap around guard, reversing switch, thumb control, and horn ✓Low mounted steer arm offers excellent operator comfort and minimum steering effort STRUCTURAL INTEGRITY ✓Fork size: 27" x 42" (686 mm x 1,143 mm) standard ✓Tapered forks and entry and exit rollers support smooth pallet handling ✓Galvanized housing with sturdy construction ✓ Telescoping mast includes a plexiglass mast guard and provides a 128" (3,251 mm) maximum fork elevation with a single cylinder ✓ 4" (102 mm) wide adjustable straddle legs allow for configurations to fit various sized pallets Durable powder coat paint

The EPS-22 Powered Walkie Stacker is designed to support general material handling, complicated work positioning, and economical yet efficient operations. CAPACITY ✓ 2,200 lb (1,000 kg) LIFT HEIGHTS ✓ 63" (1,600 mm) ✓ 96" (2,438 mm) ✓ 116" (2,946 mm) PERFORMANCE ✓ 24V DC permanent magnet drive motor delivers steady acceleration and travel speeds ✓ Curtis® Transistor Travel Controller supports simple and precise truck positioning ✓ Electronic neutral braking function provides smooth and safe travel control ✓ Creep speed control allows for easier maneuvering at low speeds in tight places ✓ Travel speed: 3.41mph (unloaded) and 2.5mph (under load) ✓ Battery discharge indicator (BDI) monitors performance ERGONOMICS ✓ Ergonomic fingertip control handle has a wrap-around hand guard, thumb control travel function, and easily accessed lift and lower buttons for strain-free operations ✓ Hand grips fit the operator's hand comfortably, reducing fatigue STRUCTURAL INTEGRITY ✓ 24" (610 mm) load center ✓ Fork size: 29.5" x 42" (749 mm x 1,067 mm) standard ✓ Integral 24V 60 AH rechargeable batteries and direct-connect 110A 110VAC charger ✓ EPS-22-62 non-telescoping mono mast with single lifting chain and mast rollers provide smooth lift / lower operation ✓ EPS-22-96/116 has telescoping high visibility mast and inner rail, clear view Plexiglas mast guard, dual lifting chains, adjustable mast rollers ✓ High-strength service cover protects internal components from impact damage APPLICATION VIDEO

The WPS manual push stacker is a modern and highly versatile work positioning stacker for all modern material handling needs.Intermediate-duty and with a lift height of up to 150" (3,810 mm). CAPACITY ✓ 2,200 lb (1,000 kg) LIFT HEIGHTS ✓ 130" (3,302 mm) ✓ 150" (3,810 mm) PERFORMANCE ✓ Manually propelled with up / down level control mounted on dash ✓12V system comes with low-maintenance deep cycle battery ✓ Built-in 10AMP plug-in battery charger for 115V / 1PH / 60Hz power supply ✓ Digital battery discharge indicator ✓ Foot pedal parking brake supports instant stop action ERGONOMICS ✓ Ergonomic spring-loaded pull handle with comfort grip for reduced operator fatigue ✓ Dual push handles mounted at comfortable height level on the mast STRUCTURAL INTEGRITY ✓ 24" (610 mm) load center ✓ Fork size: 42" (1,067 mm) standard, with 31" (787 mm) OD adjustment on pin-style forks ✓ Straddle legs adjust to three positions for varying pallet sizes ✓ Channel mast fitted with heavy-duty roller bearings and dual lift chains ✓ Sturdy operator protection screen preserves visibility ✓ High-strength service cover protects internal components from impact damage

The Blue Giant XPS Manual Straddle Truck is a multi-faceted and ergonomic alternative to manual lifting for intermediate duty stacking and pallet positioning applications. CAPACITY ✓ 2,200 lb (1,000 kg) LIFT HEIGHTS ✓ 62" (1,575 mm) ✓ 96" (2,438 mm) ✓ 116" (2,946 mm) PERFORMANCE ✓ Manually propelled with up / down level control mounted on dash ✓ 12V system comes with low-maintenance deep cycle battery ✓ Built-in 10AMP plug-in battery charger for 115V / 1PH / 60Hz power supply ✓ Foot pedal parking brake supports instant stop action ERGONOMICS ✓ Dual handle mount position allows the operator to push and pull the stacker with large loop handle at a convenient height while working in tight areas. The lower fold down handle position allows the operator more leverage with heavier loads. STRUCTURAL INTEGRITY ✓ 24" (610 mm) load center ✓ Fork size: 42" (1,067 mm) standard, with 31" (787 mm) OD adjustment on pin-style forks ✓ Straddle legs adjust to three positions for varying pallet sizes ✓ Channel mast fitted with heavy-duty roller bearings and dual lift chains ✓ Sturdy operator protection screen preserves visibility ✓ High-strength service cover protects internal components from impact damage